The Venneri Traditional Series
The "Traditional Series" of reel seats start with the finest woods and metal. Each reel seat is then carefully constructed to exacting specifications. The Traditional Series of reel seats add a statement of beauty and quality to any flyrod. As with all of Venneri's reel seats, custom boring, finishing, milling and engraving is available.
The Large Uplock 23/32
Recommended Line Weight: 5-9
Standard inside diameter: .375
Maximum
bore allowed: .440
Price: $66.00
Hardware only: $56.00
Black hardware: Add $22.00
Engraved: Add $22.00
The Large Uplock 23/32 with attached fighting butt
Both sections cut from the same
stock of wood for a perfect match. Shown here in nickel silver and spalted
maple. 
| Recommended
Line Weight: Standard inside diameter: Maximum bore allowed: Price: $88.00 Hardware only: $75.00 Black hardware: Add $22.00 Engraved: Add $22.00 |
5-9 .375 .440 |
The
Large Uplock 23/32 with removable fighting butt
A machined shaft with O-ring seal fits into the back of the main section of this seat. Both sections cut from the same stock of wood for a perfect match. Shown here in nickel silver and burled maple.
Standard size of fighting butt is 2 inches. Example shown is larger. Butt cap available for when the fighting butt is removed.
| Recommended
Line Weight: Standard inside diameter: Maximum bore allowed: Price: $99.00 Hardware only: $88.00 Black hardware: Add $22.00 Engraved: Add $22.00 |
5-9 .375 .440 |
| The
Large Downlock 23/32 |
Specifically
designed for larger rods.
| Recommended
Line Weight: Standard inside diameter: Maximum bore allowed: Price: $66.00 Hardware only: $56.00 Black hardware: Add $22.00 Engraved: Add $22.00
|
|
| The Small Uplock 21/32 | |||
|
Recessed hood with a fine thread for small, lightweight rods. Shown here in nickel silver and burled maple. |
 |
||
| Recommended
Line Weight: Standard inside diameter: Maximum bore allowed: Price: $66.00 Hardware only: $56.00 Black hardware: Add $22.00 Engraved: Add $22.00 |
2-5 .320 .390
|
| The Small Downlock 21/32 | ||||
| Includes a fine thread for small, lightweight rods | . | No
picture available |
||
| Recommended
Line Weight: Standard inside diameter: Maximum bore allowed: |
2-5 .320 .390 |
Price:
$66.00 Hardware only: $56.00 Black hardware: Add $22.00 Engraved: Add $22.00 |
|
|
Click on Links below